AF1003 - 1/2 Inch Air Impact Wrench
This high quality unit is built for years of dependable service. Built in regulator allows four torque settings: 230, 215, 195, and 150 ft. lbs. of torque. Push-pull reversing lever for easy operation.Order Now
AF3002 - Heavy Duty 1/2 Inch Air Impact Wrench
Dynamic pic clutch design develops up to 380 ft. lbs. of torque. Alloy steel anvil and steel clutch housing. Dependable built in power regulator. Contoured grip with balanced weight distribution reduces operator fatigue.Order Now
AF3001 - Heavy Duty 3/4 inch Air Impact Wrench
AF25 - 1 inch Impact Wrench with 6 inch Anvil
AF1009-6 - 3/8 inch Butterfly Air Impact Wrench
This versatile tool allows immediate forward and reverse, as well as speed control without taking your hands off the work. Eight torque settings. Swivel air inlet and compact size allow easy access to tight spots.Order Now
AF1006B - 3/8 inch Air Ratchet Wrench
Cutting & Punching Tools
AF1022 - Air Utility Cut-Off Tool
A heavy duty 3" wheel cutter. Cuts through muffler clamps, hangers, sheet metal, radiator hose clamps, rusted bumper bolts, and steel rods up to 3/4" thick. Standard equipment includes an abrasive 3" disc, independent power regulator, and features a hand guard trigger.Order Now
- 1 Aluminum Oxide Disk: For cutting sheet metal, bolts, sanding, leveling and trimming corners.
- 1 Silicone Carbide Disk: For fine cutting of natural and artificial stone.
- 1 White Aluminum Oxide Disk: For cutting steel and stainless steel.
- 1 Green Silicon Carbide Disk: For cutting natural and artificial stone.
AF6006 - Metal Shear - Pistol Shape
AF1001 - 150mm Air Hammer with 4 Chisels
Contoured one piece polished aluminum housing for comfortable grip. Positive action trigger and built in regulator for easy speed and power control. Quick change spring for easy chisel changes. This unit is ideal for muffler and tail pipe removal, spot weld bustin, panel cutting and a host of other jobs. Includes punch, ripping chisel, cold chisel and panel cutter.Order Now
AF2065 - 4 piece Air Chisel Set
Four piece air chisel set includes flat chisel, tapered punch, panel cutter and weld buster with 0.401" round shank size. For use with Mark 1 AF1001, AF1001-2, and most other 0.401" round nozzle air hammers.Order Now
AF1001-ACC - Spring Retainer
AF1008A - 16 Gauge Air Nibbler
This ultra-light tool weighs just over 2 lbs. and cuts through 16 gauge mild steel without deforming the sheet or leaving a burr. Die adjusts for cutting forward, backward, right or left. Ideal tool for metal fabrication.Order Now
AF1019A - Air Grease Gun - Pistol Shape
Easy to use, trigger-operated. Special rubber plunger pushes all grease in barrel forward under steady pressure. Delivers 1,200 to 6,000 PSI when supplied 30 to 150PSI (2kg/cm2 to 10kg/cm2) from compressor. Loads three ways and has E-Z air vent valve filler plug. Handle thread for 1/4" NPT air fitting. May be used with flexible hose (not included).Order Now
Drills & Screwdrivers
AF6001 - 3/8 inch Reversible Drill
Ideal for tough jobs. A great tool for drilling, honing, wire brushing and reaming. Convenient side switch allows single-handed changes in direction. Three geared drive system for added power.Order Now